The camera is provided with a function to memorize exposure conditions of an object. This makes it possible
to make a "local" light-measurement of a small part of your subject, and use this setting for the entire photo.
Use as follows:
- Bring the camera close to that portion of the subject in such a way that it would be located in the center of
viewfinder and would occupy approximately 60% or more than the field of the viewfinder;
- Slightly press on the shutter release button (one flick) and, holding it in this position, arrange your subject;
- Refocus the lens press the shutter release button fully to take the picture.
This function of camera makes it possible to photograph against the sun, on snow and so forth, etc. .
5.2.2 Semi-automatic mode of exposure control
Semiautomatic mode makes possible the operator to select the combination of shutter speed and diaphragm and
to estimate the error of exposure with the selected combination. This mode provides great possibilities to the
qualified operator.
If the difference between that manual and calculated exposure exceeds one exposure number, the upper or
lower red light-emitting diode will shine, informing operator of an exposure error.
5.2.3 Mode "B"
This mode is selected by the mode selection switch 5. During photographing in mode "B" the shutter is opened
as long as the shutter release button 4 is pressed. With operation in mode "B" of camera, as tripod should be
used.
5.3 USE OF THE DIAPHRAGM
The value of the lens aperture is established against the index by turning the aperture setting ring 17. In this
case the diaphragm of the lens does not change, but the value to which the diaphragm will close during
shooting is determined.
D
Direct the camera through the eyepiece of viewfinder to thesubject. Turn on the camera. If
the combination of the diaphragm, shutter speed and photosensitivity of film provides a
correct exposure, green light-emitting diode continuously shines or blinks.
The flashing of the upper red light-emitting diode with the continuously luminous green
indicates excess light for this combination of diaphragm, shutter speed and photosensitivity
of film.
The flashing of the lower red light-emitting diode with the blinking green indicates
insufficient light for this combination of diaphragm, shutter speed and photosensitivity of
film.
Pa
e 9 of 14Krasno
orsk
zavod -- User manual -- ЗЕНИТ-КМ
7/26/2004file://C:\km
manual\KM.htm
(9 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale