2. . Series shooting with a frequency of 2 frames/s with shutter speeds from 1/30 to 1/2000 s
Smoothly press the shutter release button fully, and hold it in this position.
The camera will work continuously for several cycles.
The quantity of photographs will correspond to the time of the retention of the shutter release button. The
recommended series is not more than 8 frames. It is recommended to wait not less than 10 minutes between
series.
Ignoring these recommendations sharply reduces the life of the batteries!
3. Photographing with the self timer
Photographing with the self timer it is recommended to mount the camera on a tripod, then:
- Compose the image;
- Focus the camera;
- Select the correct exposure in accordance with the selected subject, the photographing in mode "A"
ou must
install the eyepiece cover of the viewfinder
, having previously removed the eye piece cover 13 Fig. 3;
- Press the self timer release button 10 Fig. 2 and take your planned place before the lens. The countdown
shutter release begins with the pressure on the self timer release button:
- The shutter release indicator begins to flash 3 Fig. 1 and the frame counter for appromimately 15 seconds.;
- The approach of the shutter release is determined by an increase in the frequency of flashing of the shutter
release indicator and frame counter during the final two 2 seconds;
- Ater which the shutter operates, the film advances one frame and the shutter is reset;
- The frame counter will advance by one number.
If the self timer release button is pressed by mistake, to end the automatic release repeatedly press on the same
button.
5.6 UNLOADING the CAMERA
Press the back cover unlock button 26 Fig. 5, open the back cover, and take out the film cassette from the
cassette chamber 11. The Camera will allow you to rewind the film on any frame (not necessarily on the very
last fame). To do this it is necessary to press the film rewind button on any frame and to perform all steps
above.
When the end of film in the cassette is reached, the camera automatically stops advancing
frames, and the blinking number of the last frame taken is displayed in the frame counter. This
it signals that the film needs to be rewound (rewind of film into the cassette). To rewind the
film, press and do not release the film rewind button Fig. 2 until the film is completely rwound
into the cassette (the camera rewind motor stops running).
During the rewind process, the frame counter displays a running "snake",
And when rewinding is complete (motor turns off) the frame counter display shows the symbol
"
o_
".
Release the film rewind button , and the frame counter display shows the symbol "
-O
".
Pa
e 11 of 14Krasno
orsk
zavod -- User manual -- ЗЕНИТ-КМ
7/26/2004file://C:\km
manual\KM.htm
(9 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale